NEWS

News & Events

News from Moldsonics, insights into our collaboration with industry partners, and events where you can meet us in person.

Thomas Mitterlehner on stage at Towards Zero

News

Events

NEWS

News from Moldsonics

Latest developments, new partnerships, and insights into our products and industrial applications.

Moldsonics Wins the PHÖNIX Spin-off Award

From Research to Production Industrial innovation rarely happens overnight. The Austrian PHÖNIX Startup Award honors companies...

Flow front detection in injection molding: Patented direct measurement

flow front is one of the most critical—and at the same time, one of the least transparent—phases in the injection molding process. The switchover point is often determined indirectly via...

Moldsonics at K 2025: Ultrasound in Practice

Many production problems go unnoticed In plastics processing, many problems only become apparent once scrap has already been produced. Wear and tear...

Moldsonics Wins the 2025 Young Entrepreneur Award in the "Visionary" Category

In plastics manufacturing, many critical aspects of the process remain invisible. Material behavior varies from batch to batch, wear and tear...

Moldsonics & BOOXit receive EU funding as part of DEREMCO

Precise processing of recycled materials – with intelligent sensor technology and smart product design Moldsonics and BOOXit were developed as part of an open call for proposals under the EU project...

EDISON Prize ChangeMaker 2025 for Moldsonics

We are very pleased: Moldsonics has been honored with the EDISON Changemaker Award 2025 - a special prize for young technologies that have the potential to...

Inline sensor technology in injection molding: Moldsonics live at ENGEL & Smart Plastify

What no one could see before, we are now making visibleMaking hidden data visible - directly in the plasticizing cylinder. Last week, the...

Revolutionizing injection molding: Smart Plastify validates heating technology with Moldsonics' ultrasonic system

"Moldsonics will provide us with crucial insights with their technology for which I have not yet seen a technical solution - so I am...

Axxicon & Moldsonics present unique solution for measuring flow velocity in injection molding

Axxicon and Moldsonics have jointly developed a new flow velocity measurement system for injection molding. The MoldFront flow velocity measurement system enables...

Moldsonics is part of Green Tech Startups Austria 2025: Ultrasound technology for the circular economy

Moldsonics is proud to be recognized as one of the Green Tech Startups Austria 2025 - especially in the Circular Economy category.

New use case: Flow front detection in the processing of thermoset

Sept. 2024

Optimizing the thermoset injection moulding process at Ottronic: An innovative application example of MoldFront sensor technology In today's industry, the focus is on optimizing production processes in order to reduce costs, minimize waste and improve quality.

Thomas Mitterlehner in an interview at Toolplace

Aug. 2024

Thomas Mitterlehner from Moldsonics at Toolplace: How our innovative ultrasonic sensor technology is revolutionizing the injection molding process At Moldsonics, we are always striving to push the boundaries of manufacturing technology. That's why we are particularly pleased that our...

Moldsonics at the KUTENO 2024

May 2024

Our visit to KUTENO 2024: Innovative sensor solutions at Sauer & Sohn and Condamos We had the pleasure of attending KUTENO 2024 - the ultimate supplier fair for the plastics industry in northern Germany. Here we were able to present our latest...

Moldsonics in Factory Magazine

Apr. 2024

Moldsonics in Factory Magazine We are pleased to announce that our innovative start-up Moldsonics has been featured in the prestigious Factory Magazine! What is Factory Magazine? Factory Magazine is a leading publication in the industrial and manufacturing...

Kunststoff Magazin: New measuring methods in plastics processing

March 2024

New measuring methods for plastics processing - Now in Kunststoff Magazin We were delighted that our start-up Moldsonics was featured in Kunststoff Magazin! About Kunststoff Magazin Kunststoff Magazin was the leading trade journal for the plastics industry.

Moldsonics in the PTC Blog

Jan. 2024

New paths in the plastics industry - Now in the PTC Blog We are delighted that our start-up Moldsonics has been featured in the latest PTC Blog! What is the PTC Blog? The PTC Blog is a leading platform for innovations and trends in the industry. It offers...

MA² Innovation Award from ÖVIA for Moldsonics and EREMA

Nov. 2023

Our groundbreaking innovation, "PredictON: Plastification Unit— wear measurement s as a Service," developed in collaboration with EREMA Engineering Recycling Maschinen und Anlagen, impressed the jury and won this year's Innovation Award from the ÖVIA (Austrian Association...

Moldsonics in the magazine DIE MACHER

Sept. 2023

Moldsonics: The Future of Plastics Processing - A Journey into Innovation Moldsonics, a dynamic startup in the field of measurement hardware for injection molding processes and polymer processing, has recently made headlines. A detailed article about...

From Research to Innovation: Federal Minister Polaschek Visits JKU Spin-off Moldsonics

Aug. 2023

Another milestone in the development of our company Moldsonics was marked by the visit of the Austrian Federal Minister Martin Polaschek today. Our innovative company, which in the initial phase was significantly supported by the FFG...

State Minister of Economic Affairs Achleitner Presents the tech2b Winner Certificate to Moldsonics

June 2023

Moldsonics successfully completes the tech2b Incubate program and receives the Winner Diploma from Achleitner, the regional councilor for economic affairs. We at Moldsonics are overwhelmed with joy, because we have recently received the Winner Diploma of the tech2b Incubate...

Ultrasound-based detection of flow fronts in injection molds

May, 2023

In this paper, we describe a new method for dynamic detection of flow fronts in injection molds using ultrasonic sensors.Injection molding is a widely used process for manufacturing plastic parts. In this process,...

Difference between structure-borne sound and directly measuring ultrasonic sensor technology

May, 2023

In this article, you will learn exactly what the difference is between structure-borne sound systems and directly measuring ultrasonic sensor technology.Injection molds are essential for the production of plastic parts. This involves a process in which...

Application example Haidlmair and Moldsonics

Dec. 2022

Haidlmair mold and Moldsonics sensors—a perfect combination. This application example illustrates how you can use the MoldUni sensor system in practice. At this year’s K2022 in Düsseldorf, Haidlmair and Moldsonics presented...

That was K2022!

Dec. 2022

K2022 in Düsseldorf, the leading trade fair for the plastics and rubber industry, was a major success for the industry this year. More than 176,000 trade visitors from every continent traveled to the event, which took place at the Düsseldorf Exhibition Center. The...

K2022 – Official Press Release

Nov. 2022

K2022 – Trade fair results exceed all expectations A driver of innovation for the global plastics and rubber industry A wide range of practical solutions, machinery, and products for the transition to a circular economy The excitement of the plastics and rubber industry at...

EVENTS