NEWS AND PRESS
On this page we want to share news and press releases from our activities and cooperations with you!
Inline sensor technology in injection molding: Moldsonics live at ENGEL & Smart Plastify
What no one could see before, we are now making visibleMaking hidden data visible - directly in the plasticizing cylinder. Last week, the...
Revolutionizing injection molding: Smart Plastify validates heating technology with Moldsonics' ultrasonic system
"Moldsonics will provide us with crucial insights with their technology for which I have not yet seen a technical solution - so I am...
Moldsonics is part of Green Tech Startups Austria 2025: Sustainable ultrasound technology for the circular economy
Moldsonics is proud to be recognized as one of the Green Tech Startups Austria 2025 - especially in the Circular Economy category.
Axxicon and Moldsonics present unique solution for flow velocity measurement in injection molding
Axxicon and Moldsonics have jointly developed a new flow velocity measurement system for injection molding. The MoldFront flow velocity measurement system enables...
New use case: Flow front detection in thermoset processing
Optimization of the thermoset injection molding process at Ottronic: An innovative application example of MoldFront sensor technology In today's industry, the...
Thomas Mitterlehner in an interview at Toolplace
Thomas Mitterlehner from Moldsonics at Toolplace: How our innovative ultrasonic sensor technology is revolutionizing the injection molding process At Moldsonics, we are always...
Moldsonics at the KUTENO 2024
Our visit to KUTENO 2024: Innovative sensor solutions from Sauer & Sohn and Condamos We had the pleasure of attending KUTENO 2024 -...
Moldsonics in Factory Magazine
Moldsonics in Factory Magazine We are pleased to announce that our innovative start-up Moldsonics has been featured in the renowned Factory...
Kunststoff Magazin: New measuring methods in plastics processing
New measuring methods for plastics processing - Now in Kunststoff Magazin We were delighted that our start-up Moldsonics was featured in Kunststoff Magazin...
Moldsonics in the PTC Blog
New paths in the plastics industry - Now in the PTC Blog We are delighted that our start-up Moldsonics has been featured in the latest PTC Blog!
MA² Innovation Award from ÖVIA for Moldsonics and EREMA
Our groundbreaking innovation "PredictON: Plastification Unit - Wear Measurement as a Service", in cooperation with EREMA Engineering Recycling Maschinen und Anlagen, convinced the jury and won this year's Innovation Award of the ÖVIA (Austrian Association of Plastification...
Moldsonics in the magazine DIE MACHER
Moldsonics: The Future of Plastics Processing - A Journey into Innovation Moldsonics, a dynamic startup in the field of measurement hardware for injection molding processes and polymer processing, has recently made headlines. A detailed article about...
From Research to Innovation: Federal Minister Polaschek Visits JKU Spin-off Moldsonics
Another milestone in the development of our company Moldsonics was marked by the visit of the Austrian Federal Minister Martin Polaschek today. Our innovative company, which in the initial phase was significantly supported by the FFG...
Regional Minister for Economic Affairs Achleitner presents Winner diploma from tech2b to Moldsonics
Moldsonics successfully completes the tech2b Incubate program and receives the Winner Diploma from Achleitner, the regional councilor for economic affairs. We at Moldsonics are overwhelmed with joy, because we have recently received the Winner Diploma of the tech2b Incubate...
Ultrasound-based detection of flow fronts in injection molds
In this paper, we describe a new method for dynamic detection of flow fronts in injection molds using ultrasonic sensors.Injection molding is a widely used process for manufacturing plastic parts. In this process,...
Difference between structure-borne sound and directly measuring ultrasonic sensor technology
In this article, you will learn exactly what the difference is between structure-borne sound systems and directly measuring ultrasonic sensor technology.Injection molds are essential for the production of plastic parts. This involves a process in which...
Application example Haidlmair and Moldsonics
Haidlmair mold and Moldsonics sensors - a perfect interplay. This application example illustrates how you can use the MoldUni sensor system in practice.At this year's K2022 in Düsseldorf, Haidlmair and Moldsonics presented...
That was the K2022!
K2022 in Düsseldorf, which is the leading trade show for the plastics and rubber industry, was a great success for the industry this year. More than 176,000 trade visitors from all continents traveled to the event, which was held at the Düsseldorf Exhibition Center. The...
K2022 - Official Press Release
K2022 - Trade fair results fulfill highest expectations Innovation driver for the global plastics and rubber industry Multitude of concrete solutions, machines and products for the transformation towards a circular economy The joy of the plastics and rubber industry at...
Moldsonics on the K2022
70 years of K in Düsseldorf - a reason to celebrate! We are taking advantage of this anniversary and are represented at the fair for the first time with our own Moldsonics booth. K is considered the world's No. 1 trade show for the plastics and rubber industry. The products shown there...

Moldsonics GmbH
Hafenstraße 47-51
4020 Linz, Austria
info@moldsonics.at
Supported by: